Sonic 1200M
Sonic 1200M
Sonic 1200M超声探伤仪具有可简化操作过程的模块化显示特性。这款仪器还具有以下多种创功能:排列整齐的键盘、飞梭旋钮(Smartknob™)、可自行定义的互换式显示,以及PowerLink技术。
The Sonic 1200M is an advanced lightweight digital ultrasonic flaw detector incorporating our exclusive modular display design for simplicity of operation. It has various innovative design features such as an uncluttered keypad rotating Smartknob™ customer interchangeable displays and PowerLink™ technology making it extremely simple and intuitive to operate.
The Sonic 1200M (NSN: 6635-01-530-7826) incorporates all of the advanced features of the Sonic 1200HR+ including high resolution thickness gauging with readings down to 0.0050 inches Distance Amplitude Correction (DAC) dual flaw gates data logging of up to 5000 readings narrow band receiver for enhanced signal to noise ratios PowerLink™ transducer recognition VGA output to heads-up display or monitor and tunable square wave pulser.
Additionally the Sonic 1200M includes a interface following gate for immersion and bubbler applications selectable negative spike pulser/tunable square wave pulser for the ultimate in resolution and power display average display persist 4 kHz pulser repetition rate and new Foreign Object Debris (FOD) and anti-marring case.
Features
· New Foreign Object Debris (FOD) free and anti-marring case design
· Lightweight 3.8 lbs. (1.72 Kg)
· Selectable Spike/Square Wave Pulser
· Interface Sync (Sweep and Gate)
· Rep rate increased to 4 kHz
· 0.5 & 3.5 MHz Narrow Band Tuned Receiver
· Display Persist
· Display Average
· Customer interchangeable displays:
o Hi-Brite Electroluminescent
o Monochrome Liquid Crystal
o Color Liquid Crystal
· VGA output for heads-up display or external monitors and projectors
· Single Li-Ion operation or optional remote battery packaging
· 10+ hour battery run time
· PowerLink™ Technology - automatic transducer recognition and instrument set-up
· 24 hour loaner guarantee
Sonic 1200M Specifications*
Pulser |
Type: Selectable spike or square wave |
Pulse Width: 15 to 1000 ns |
Pulse Voltage: Selectable 300/150 volts |
Damping: 25 50 or 200 ohms |
Modes: Selectable single (pulse echo) dual or through transmission |
Receiver |
Frequency Band: 0.3 to 20 MHz |
Tuning: Selectable 0.5 1 2.25 3.5 5 10 15 Wideband (0.3 - 20 MHz) Highpass (3 - 20 MHz) |
Gain Control: 0 to 110 dB |
Control: Continuous adjustment in selectable 0.1 0.2 0.5 1.0 2.0 6.0 12 dB |
Linear Reject: 0 to 80% full screen |
Modes: RF fullwave half+ half- fullwave filtered: 10 5 and 2.25 MHz |
Gates |
Functions: Dual flaw gates. Gate 1 time of flight or amplitude detection flaw alarm. Gate 2 amplitude detection flaw alarm or time of flight for echo-to-echo mode. Gate 1 selectable IP or IF sync |
Indicator: Flashing LEDs and horn |
Peak Amplitude: Peak amplitude of gated signal in percent of screen height |
RF Gates: Positive logic requires that a signal cycle of either polarity cross a gate level; negative logic requires that no signal cross a gate level. |
Time Base |
Range: 0.048 to 296 inches (1.23 to 7511 mm) of steel (0.418 to 2560 μs) |
Delay: -1.16 to 185 inches (-29 to 4.7 mm) of steel (-10 to 1600 μs) |
Velocity: 0.025 to 0.600 in/μs (635 to 15240 m/s) horiz. linearity +/- 1% of full screen |
Pulse Rate: Selectable maximum; 50 Hz steps 50 to 4000 Hz limited by range and pulser settings Thickness |
Range: 0.005 inches (0.127 mm) up to the maximum display range setting |
Modes: IP - Gate 1 IF to Gate 1 Gate 1 to Gate 2 |
Trigger Modes: Peak or edge |
Trig. Functions: Angle beam calculations curved surface correction |
Angle: 0º - 90º in 0.1º increments display features |
Signal: Hollow or filled |
Screen Freeze: On command currently displayed signal is frozen |
Waveform Recall: Select and display stored waveform |
Peak Hold: Displays peak amplitude with active signals under peak signal |
A-scan Storage: Up to 100 A-scan waveforms may be stored for playback or printout |
A-scan Security: Read-only selection prevents accidental erasure of A-scans |
Update Rate: 60 Hz |
Persistence: Adjustable from 0.1 to 10.0 seconds in 0.1 second steps |
Display Average: Selectable 248 and 16 frames |
Additional Features
VGA Output |
RS-232: DB-9P connectors |
Analog Output |
PowerLink™: Automatic transducer recognition and application setups. Transducer identification on printouts |
Program Storage: Up to 200 test setups (additional 100 setups with A-scan storage) |
Clock Calendar: Time and date information stored and printed with each waveform |
Languages: Selectable - English Spanish French and German |
Software: Windows-based FlawMaster™ general |
Dimensions: 9.5" L x 5.5" W x 3.5" D (241 mm x 140 mm x 89 mm) |
Weight: 3.8 lbs (1.7 kg) |
Display: Customer-Interchangeable QVGA (320 x 240 pixels) monochrome backlit liquid crystal display (LCD) color LCD or Hi-Brite EL display |
Operating Temperature: -4o to 140o F (-20o to 60o C) |
Storage Temperature: -40o to 176o F (-40o to 80o C) |
Power |
DC: One Li-Ion battery optional external D-Cell battery pack |
AC: 90 264 volt 50-60 Hz mains |
Battery Operating Time: 10+ hours |
Humidity: Safe operation in exposure to Class 3 temperature/humidity environments (5 to 95%) |
Classification: Based on Class 2 specifications from the MIL-PRF-28800F |
Altitude: Maximum operating and non-operating altitude - 15000 ft. (4600 m) |
Hazardous Area Operation: Safe operation in explosive atmosphere as defined by Class I Division 2 Group D as found in the National Fire Association Code (NFPA 70) Section 500 and tested using MIL-STD-810E Method 511.3 Procedure 1 |
DAC |
Type: Segmented 25 selected points |
Gain: 40 dB total of gain and DAC limited to 110 dB maximum |
Display: Selection of multiple curves showing compensation: single curve at signal level (0 dB) three curves at +6 dB 0 and -6 dB levels four curves at +6 dB 0 -6 dB and -14 dB levels DAC compensated echoes only single curve with DAC compensated echoes |
Reference Memory: Recall waveform displayed simultaneously with active signal |
Data Logging: 5000 readings |